Popular Posts

Tuesday, 1 April 2014

Live Laugh Love + Upcycling


I made this for my daughter Nicole.


Warning this is a bit of a long post, you may want to grab a cuppa before you read on.

This project was constructed with the help of my Cricut. 
I wanted a wee house shape, but the nearest I had was this tag shape...I thought.... well, near enough! 
Using multiple layers of cereal packet card, I glued the base tag shapes together, on top of each other with a strong wet glue until it was about 5mm thick (approx 8 - 10 layers of card  for each base section, (32 -40 layers altogether... I lost count!). I then sanded each now thick, solid shape when it was dry. For the framed fronts I used my Gypsy & Cricut to design and cut the aperture I wanted in the tag. I chose a basic rectangle, and a heart shape for the other. I cut approx 16 layers each design (8 for each front) with the aperture in the centre for the fronts these were layered and sanded as before.
I cut 4 fronts with the apertures, (2 of each design), and 4 tag shapes for the backs, from some lovely old Basic Gray 12 x 12 paper I had in my stash. This was a rich brown, beige and rust coloured design so after sticking to the block shapes I lightly sanded again. I painted them with a thin layer of Gesso so you could still see the paper design through it, but it's muted, I added this top layer with wet glue before assembling, and sanding again. (the paper dust is awful stuff, it gets everywhere, but it's worth the mess for the lovely smooth result)
I also cut 4 of the base shapes from white card for the top of the base layers for stamping on the top of the base so it would be visible inside the apertures when these were added and glued in place. I lightly sanded the edges of  this layer too. I stamped over the 8 main card "block" pieces, base both sides back and front, and then around the aperture of the top piece) then stacked and glued together, the hinges are just printed card I had in a bits box, reinforced underneath with a thin sheer fabric glued to the card then trimmed to fit & attached with wet glue to allow to concertina fold open, I sanded again to give a smoothed edge. 
  
For the stamping, I stamped with black Archival, using mainly Birdhouse garden set of Clarity stamps images and Clarity stamped poem, masked and stamped a bit at a time to fit the shape. 
I also used a free Hot off the Press stamp "Sweet treats" with birds & bird houses that I got with Simply Cards & Papercraft magazine recently, and "Live Laugh Love" words were from an old Crafty Impressions stamp set.
I tinted everthing to add a wee bit of soft colour, using Tumbled glass and tattered rose Distress ink. 


This is it folded closed. It's solid, and feels like it's made of wood.


This is the back. 

At the top of this post you'll see the picture of the inside or opened face of the finished project.

Well done making it to the end.
Thanks for looking.

hugs Alexandra
xxx

3 comments:

  1. What a gorgeous creation - and a very substantial one too! I love the shape, the stamping and that wonderful sentiment. Your daughter Nicole must have loved receiving this beauty. Hugs, Anne x

    ReplyDelete
  2. Wow!!! and Wow again!!!!!!!!!!! This is awesome!!!!!!!!!!!!! And all the work you put into it!!! Totally love it!!!!

    ReplyDelete
  3. Well, if that don't beat all! You are so clever and creative! The stamping is beautiful. What a gorgeous set that must be. I'll have to look it up. I sure know what you mean about the sanding, but it does give a nice, smooth finish. You do inspire me. Such a lovely gift for Nicole!

    ReplyDelete

Thanks for visiting here. I hope you enjoy your visit.
I love hearing from you, and your comments are much appreciated.